Skip to main content

Arcade Table

The evolution of living room furniture is here. Made by Surface Tension, these unique coffee tables include arcade action, a multi-zone music jukebox, and full computer functionality.
These tables are made out of Walnut or Oak (your choice), with 6mm toughened glass. Available with customizable computer specifications, or as a retrofit (where you install your own computer). Powered by a Windows 7 operating system it incorporates the Gamex front-end, Apple iTunes Jukebox, Mame compatible gaming platform, and Firefox web browser. Hardware includes a 19" LCD monitor (upgradeable to 26"), amplified speakers, and arcade quality joysticks, buttons, and spinner.
Available in two models
'Arcane'
'Double7'
Definitely not cheap at about $5,300(CDN) + s/h and taxes for the complete base model or about $4,200(CDN) + s/h and taxes for the retro-fit (no computer) base model.

For a complete list of games click here, and if you want to see more pictures you can find those here

Comments

Popular posts from this blog

Longboarding With Team Original

Love this video, makes longboarding look like so much fun. Do they rent longboards? Are there areas to longboard here in BC? Gonna have to find out and finally give this sport a try. Until then I'll have to keep watching this video... Via - LikeCool By: Mass

Project: Motorola DCT3416

My brothers Motorola DCT3416 died, and I figured I would attempt to fix it. I want to start out by saying I know very little about PVR's, other than somewhere buried inside is a standard computer hard drive. While dropping off the DCT3416, my brother informs me that it doesn't turn on, and that it makes this clicking noise. My first assumption is that the HD is corrupt and or damaged and preventing the machine from booting. Replacing the internal HD should produce a simple fix, so lets go about doing just that. Replacing the internal HD is going to be slightly more complicated than originally anticipated as the rear of the DCT3416 has 3 tamper proof/security screws, which I do not have a tool for. Instead I used a series of pliers, and 10 minutes later had all the screws removed. Here is what the tamper proof/security screws look like, once removed.   I should add that there is also a plastic security tab, just above the IEEE 1394 jacks, which disintegrated when I attempted to

Project: Netgear GS116

Truth be told, this repair was done quite some time ago and is actually part of my structured media home wiring project, which is still ongoing. This Netgear Prosafe 16 Port Gigabit Switch was part of a Craigslist lot I purchased, containing a bunch of computer equipment.  Seeing as I had no need for this switch, at the time, it just sat in my office collecting dust. Once I started my structured media home wiring project I realized the 16 port Netgear could be quite useful, but after a few unsuccessful attempts at utilizing it I realized it was DOA. Here's the situation, when this switch is plugged in, an LED will signify the unit is on and working, however whenever an Ethernet cable is inserted into any of the available jacks, there is no LED activity or connectivity. I took to the world wide web and came across a few similar situations all of which indicated that my unit probably had a bad capacitor. To verify if this was indeed the culprit behind my non functioning switch I woul