I'm sure you remember seeing the late night infomercials, so there is probably no real reason for me to post an article about the DualSaw. Well normally there would be no reason, but as you can see from the picture above, there have been some changes made to the DualSaw since the late Billy Mays was advertising it. The most notable change, and main reason for my article, is the cool Mass-IMO color scheme of Black/Green. Want to see that old infomercial, then keep reading...
My brothers Motorola DCT3416 died, and I figured I would attempt to fix it. I want to start out by saying I know very little about PVR's, other than somewhere buried inside is a standard computer hard drive. While dropping off the DCT3416, my brother informs me that it doesn't turn on, and that it makes this clicking noise. My first assumption is that the HD is corrupt and or damaged and preventing the machine from booting. Replacing the internal HD should produce a simple fix, so lets go about doing just that. Replacing the internal HD is going to be slightly more complicated than originally anticipated as the rear of the DCT3416 has 3 tamper proof/security screws, which I do not have a tool for. Instead I used a series of pliers, and 10 minutes later had all the screws removed. Here is what the tamper proof/security screws look like, once removed. I should add that there is also a plastic security tab, just above the IEEE 1394 jacks, which disintegrated when I attempted to
Comments
Post a Comment